Speed Academy navigates complex technical hurdles, including axle clearance issues and a malfunctioning clutch, while completing a K24 engine and manual transmission swap. After finalizing the setup, the team puts the modified CRV on the dyno and takes it for a test drive to evaluate its real-world performance improvements.
Speed Academy is a website and YouTube channel based on making things go fast and enjoying cars. Peter Tarach and Dave Pratte are the forces behind Speed Academy.
The TTAC Creators Series tells stories and amplifies creators from all corners of the car world, including culture, dealerships, collections, modified builds and more.
An AI-produced summary of the transcript, edited by a staffer, is below.
[Image: Speed Academy/YouTube Thumbnail]
Become a TTAC insider. Get the latest news, features, TTAC takes, and everything else that gets to the truth about cars first by subscribing to our newsletter.
Summary
The video documents the completion of an ambitious engine and transmission swap that gives a high-mileage Honda CR-V a second life. The project involves replacing the original, worn-out B20 engine and slipping automatic transmission with a 200-horsepower Honda K24 engine from an Acura TSX and a five-speed all-wheel-drive manual transmission from a newer-generation CR-V.
After several months of setbacks, the team addresses the remaining mechanical problems, gets the vehicle running properly, takes it to the dyno and evaluates how much the modifications improve its performance.
Axle and Suspension Clearance
The first major obstacle involved the front axle shaft contacting the lower shock fork. Rather than returning to an earlier engine-mount configuration that would have required an EG Civic subframe and additional steering modifications, the team developed another solution.
FCS Race fabricated wider tubular lower shock forks to provide additional axle clearance. Initial testing showed that the axle cleared the new forks, but another problem emerged: the bowed tie rods contacted the suspension components at full steering lock.
The team resolved the issue by switching the tie rods from side to side and reversing their orientation. This positioned the bends in the opposite direction, providing the necessary clearance. Testing with the CR-V's 18-inch wheels confirmed approximately 10 mm of clearance at full steering lock.
The team noted that this particular solution was specific to its wheel and tire configuration, while a revised version of the shock forks would eventually be available for other installations.
Cooling System and Transmission Problems
With the axle problem resolved, attention turned to filling the K24's cooling system. Because Honda K-series engines can be difficult to bleed properly, the team used an Airlift vacuum-filling system to remove air from the system before drawing in approximately eight liters of fresh coolant. The system held vacuum, suggesting there were no leaks.
However, the first attempt to test the transmission revealed a serious problem. Even with the clutch pedal depressed, the wheels continued spinning, and the transmission resisted shifting into gear. The team initially suspected an issue with the clutch assembly or transmission installation.
After removing the transmission, the team inspected the release bearing, clutch fork, clutch disc and pressure plate. Nothing appeared obviously damaged. Eventually, comparing the original Exedy Stage 1 clutch disc with a new Exedy OE replacement revealed the problem.
The original clutch disc was binding on the transmission input shaft splines rather than sliding freely. This prevented the clutch from properly disengaging, even when the pedal was depressed.
Replacing the clutch disc with the OE-style replacement resolved the problem.
The team also discovered that it had installed a six-speed shift selector on the five-speed transmission. Although the components looked similar, their internal selector slots were different. Installing the correct five-speed selector restored the proper shifting arrangement, including all five forward gears and reverse.
Once everything was reassembled, the transmission shifted smoothly, and the team confirmed that the problem had never been with the gearbox itself.
Dyno Testing and Performance Results
200 wheel hp
With the CR-V finally operational, the team took it to tuner Nick Stanojet for dyno testing. The driveshaft to the rear wheels was disconnected, allowing the vehicle to be tested in front-wheel-drive mode without affecting the transmission's power delivery.
The K24 remained internally stock, without an upgraded Type S oil pump or a more aggressive VTC cam gear. The team expected approximately 195 to 210 hp at the wheels.
The final results landed right around 200 wheel hp, essentially matching expectations. Heat affected the results somewhat, with the engine producing approximately 195 hp when hot before improving after cooling down.
The team explained that the engine could produce considerably more power with additional modifications. A better header, less restrictive exhaust and other bolt-on components could potentially push output toward 230 hp or more.
The existing exhaust system includes a restrictive header, catalytic converter and relatively small rear muffler, all of which limit performance.
One particularly interesting dyno comparison demonstrated the difference between operating the engine outside VTEC and engaging VTEC. The VTEC pull produced approximately 60 additional wheel horsepower and more than 10 lb-ft of additional torque, illustrating how dramatically the system changes the engine's power delivery.
The team suggested that a turbocharger could be a worthwhile future upgrade.
Driving Impressions
On the road, the K-swapped CR-V feels considerably livelier than it did with its original B20 engine, which reportedly produced approximately 125 wheel hp and 120 lb-ft of torque.
The additional power makes everyday driving much easier. Rather than having to keep the accelerator nearly wide open to get the vehicle moving, the CR-V now has enough torque to accelerate confidently and pass other vehicles without much effort.
However, the team acknowledged that the vehicle doesn't feel as quick as some of its other K-swapped Honda projects. There are several reasons:
- The CR-V is considerably heavier than the lightweight Civic models the team typically modifies.
- The all-wheel-drive system adds mechanical complexity and contributes to the vehicle's heavier feel.
- The five-speed transmission has wider gear ratios than the six-speed transmissions used in some of the team's other builds.
- The engine produces approximately 200 wheel hp, somewhat less than the 220-230 hp figures common in more extensively modified K-series applications.
The engine delivers a satisfying VTEC power surge at higher engine speeds, while the exhaust note remains relatively subdued. Despite having a three-inch exhaust system, the restrictive header and Yonaka muffler produce a somewhat muffled sound.
The team believes there is room to improve both the exhaust note and engine performance.
Final Thoughts
The K24-powered CR-V is a successful transformation of a vehicle that had accumulated approximately 400,000 kilometers and was suffering from a failing automatic transmission.
Although the finished product isn't a performance rocket, it is dramatically more capable than the original vehicle. The additional horsepower and torque make it substantially more enjoyable to drive while retaining the everyday drivability that makes the CR-V useful.
The team believes a turbocharger would be the next logical step for anyone looking to make the vehicle genuinely quick. For now, however, the project has accomplished its primary objective: giving the owner's brother a dependable, entertaining CR-V with a manual transmission and all-wheel drive.
The video closes with the possibility of revisiting the project for a future turbocharger installation.